The footprint of one reformer
Studio reformers are more consistent in size than the market suggests. Across the models we supply and the ones we are asked to match, a full-length studio reformer usually lands in this range:
| Dimension | Typical range | Note |
|---|---|---|
| Length | 220–250 cm | Tower units sit at the longer end |
| Width | 60–75 cm | Outside frame, excluding handles |
| Carriage height | 25–40 cm | Decides the step-up and the mat clearance |
| Tower height | 60–90 cm above the frame | The dimension that fails ceiling checks |
Confirm the exact figures for your model before you commit a floor plan — the ranges above are typical, not a specification. Every product page on this site lists the configuration we quote, and we send full dimensions with the quotation.
The clearances that actually matter
The reformer is not the space problem. The space problem is the instructor walking between stations and the client getting on and off.
- Between two reformers, side to side: 60–90 cm is workable, 100 cm is comfortable. Below 60 cm an instructor cannot pass without asking a client to move.
- Head and foot ends: allow 60–90 cm so a client can mount, and so a foot strap can be adjusted from the end.
- Instructor circuit: a continuous path around the room, ideally 90–100 cm wide, so you can reach any station without crossing a client’s working space.
- Mirror clearance: if you teach in front of a mirror, add the distance the client needs to see their whole body — usually 1.5–2 m of open floor.
A planning table for six, ten and twenty stations
Assumptions, so you can check the arithmetic against your own room: a reformer at 2.4 m × 0.7 m, 0.9 m clear between units side to side, 1 m at the head and foot, and a 1.9 m wide bay per station. That gives about 4.0 m² of equipment zone per station. Circulation, reception, storage and changing are added separately.
| Stations | Equipment zone | Circulation (+25%) | Teaching and reception | Realistic total |
|---|---|---|---|---|
| 6 | 24 m² | 6 m² | 12–16 m² | 42–46 m² |
| 10 | 40 m² | 10 m² | 16–20 m² | 66–70 m² |
| 20 | 80 m² | 20 m² | 22–28 m² | 122–128 m² |
Two things to notice. First, the equipment zone scales linearly but the support space does not — a twenty-station studio does not need twenty times the reception. Second, a room that fits six reformers at 4.0 m² per station will not fit seven by squeezing; the circulation path is what disappears first, and an instructor who cannot walk the room is a class that goes badly.
Ceiling height, light and the things the plan does not show
- Ceiling. A tower unit needs vertical clearance above the frame, and a client standing on the carriage needs more. Check the lowest point — a beam or a duct, not the average.
- Light. Overhead light that lands directly on a client’s face while they lie down is the most common lighting mistake. Diffused side light is kinder.
- Mirrors. Useful for teaching, expensive to add later, and they make a small room feel twice its size. Decide before the walls are finished.
- Storage. Props, blankets and spare springs need somewhere that is not the floor. Allow 3–5 m² and a locking cupboard.
- Floor loading. Several hundred kilos of equipment plus bodies, concentrated on small feet. Worth a question to the landlord before signing.
A worked example
A 60 m² room, 6 m wide and 10 m long, 2.6 m ceiling, one full-height window along one long wall. The client wants six stations.
Six stations in a single row need 6 × 1.9 m of wall run, which is 11.4 m — the room has 10 m. So a single row gives five, not six.
Two rows facing each other: each row is 2.4 m deep, plus 1.2 m between the rows and 0.6 m at each wall, needs 7.2 m across the width. The room is 6 m wide. It does not fit.
What does fit: one row of five stations along the 10 m wall (9.5 m used, 0.5 m spare), 2.4 m of depth, and 3.6 m left across the width for the instructor circuit and a storage run. Five stations, comfortably — not six, squeezed.
This is why taping the layout on the floor beats any drawing. The arithmetic says 24 m² of equipment zone, and the room says five.
When the room is too small
Options, in order of how much they cost to reverse: switch some stations to folding home reformers that store upright; run a mixed timetable with mats and props for the overflow classes; reduce to four stations and raise the class price; or accept that this room is a private studio, not a group one.
The wrong answer is buying five reformers for a room that fits four. The sixth client never materialises, and the fifth reformer makes every class slightly worse.
Next step
Send us the room dimensions and the station count you are considering, and we will mark up a layout with the clearances for the exact models we quote — including whether a tower fits under your ceiling. Request a layout check, or start from the equipment checklist to see what each station needs besides the reformer.