If you are reading this with a lease already signed, skip to the timeline. If you are still comparing spaces, read the format section first — it decides everything that follows, including how much floor you need and how many units you buy.
Three studio formats, three different equipment bills
Almost every new studio is one of three shapes. They are not equally expensive, and they are not equally forgiving if you get the equipment wrong.
| Format | What the room is for | Equipment that carries the revenue |
|---|---|---|
| Group reformer | 6–12 reformers, classes of 4–8, one instructor circulating | Reformers first, props second. A Cadillac is optional. |
| Private and duet | One or two clients at a time, higher price per session | One reformer plus a Cadillac or a tower unit, and a lot of small apparatus |
| Hybrid | Group classes at peak hours, private work off-peak | Reformers for the group floor, one Cadillac or wall unit for the private corner |
The group format is the one that punishes a thin equipment budget least, because each reformer earns on every class. The private format earns more per hour but needs the clinical pieces — a Cadillac trapeze table, a tower, chairs — and those are the most expensive lines in any catalogue.
Decide the format before you negotiate the lease. A room that fits six reformers comfortably is not the same room as one that fits four reformers and a Cadillac.
Where the equipment money actually goes
Buyers consistently underestimate two things: the reformer is the single largest line, and the small items add up to more than they expect.
- Reformers. The core purchase. A studio reformer with a full tower costs several times what a folding home unit does — the frame, the carriage and the spring set are where the price difference lives.
- One clinical piece. A Cadillac, a wall tower or a ladder barrel. Usually the second-largest line, and the one most often bought too early.
- Props. Rings, bands, blocks, bolsters, blankets, small balls. Cheap per unit, and you need enough for a full class, not one of each.
- The invisible lines. Delivery, customs and duty, assembly, spare springs, and a second set of straps. On an imported order these are not rounding errors.
A useful discipline: price the room for the number of clients you will have in month six, not month one. Equipment bought for a full studio sits idle and depreciates while you build the timetable.
A timeline that survives contact with reality
Twelve to sixteen weeks is a normal run from signed lease to first paid class for a small reformer studio. The equipment is rarely the bottleneck; permits and build-out are.
- Weeks 1–2 — lease, insurance, entity. Confirm the floor loading and the ceiling height before you sign. Both are hard to change later.
- Weeks 2–4 — layout. Mark the reformer positions on the floor with tape. Walk the instructor path. You will move them twice; do it now, not after delivery.
- Weeks 3–8 — build-out. Flooring, mirrors, lighting, changing area, storage. Order long-lead items here, not later.
- Weeks 4–6 — equipment order. Place it once the layout is settled. Ask for the production and dispatch window in writing.
- Weeks 8–12 — delivery and assembly. Build one reformer fully before the rest arrive, and check the springs against the packing list.
- Weeks 10–14 — soft opening. Free or discounted sessions with friends and local instructors. This is where you find out the spacing is wrong.
- Week 14+ — public opening.
The single most common schedule failure is ordering equipment before the layout is fixed, then discovering the room only takes five of the six reformers you bought.
Three mistakes that cost the most
1. Buying the Cadillac first
A Cadillac is a beautiful piece and a poor first purchase for a group studio. It earns on private sessions, and private sessions come after you have a client base. Buy reformers, run classes, add the clinical piece when the diary justifies it.
2. Forgetting the ceiling and the floor
A full tower needs vertical clearance above the carriage. An upper-floor unit needs a floor that will take several hundred kilos of equipment plus bodies, spread over small feet. Ask the landlord for the structural information before you fall in love with the space.
3. Spending the contingency on equipment
Build-out always overruns. If the equipment budget has absorbed the contingency, the studio opens with beautiful reformers and no reception desk, no storage and no signage — and the first impression is a warehouse with good equipment in it.
Factory, distributor, or marketplace?
There are three ways to buy, and each has a different failure mode.
| Route | Strength | Where it goes wrong |
|---|---|---|
| Brand or retail | Known feel, local service, financing | Highest price per unit; the brand owns the relationship |
| Direct from a factory | Lowest unit price at volume | Minimum order quantities, no consolidation, you manage every supplier |
| Supplier who consolidates | Mixed container, one invoice, inspection before shipping, stock items for small orders | You are trusting someone else’s quality control — so ask for the inspection record |
For a first studio buying six to ten units and a full prop set, the third route usually wins on total landed cost, because the props, the spare springs and the packaging ride in the same container as the reformers.
What to ask before you pay a deposit
Six questions separate a supplier who can deliver a studio from one who can only quote a price:
- Can I see the workshop on a video call, or send an inspector?
- Which exact model is this quotation for, and what are its dimensions?
- What is the dispatch window, and what happens if it slips?
- Are the springs and straps standard sizes I can reorder in two years?
- Can you ship props and spares in the same container?
- Which certificates exist for this model, and in whose name are they issued?
A supplier who answers all six without hesitating is worth a slightly higher price. A supplier who answers three and deflects the rest will cost you more in the second year than you saved in the first.
We answer all six in writing with every quotation, and we will host your inspector or a video walkthrough before the goods are packed. If that is useful, send us the station count and the format and we will quote the room rather than a single unit.
The short version
- Pick the format before the lease, not after.
- Reformers carry the revenue; the clinical piece can wait.
- Fix the layout before you order, and tape it on the floor.
- Budget delivery, duty, assembly and spares as real lines.
- Ask six questions before the deposit, and get the answers in writing.